News You Can Use

Low Flow, High Head, Low Noise full story...

 

 

 

  

 

 

Carver has been a major supplier of specialty centrifugal pumps since 1938....

Carver's product line includes both horizontal and vertical end suction, multistage, axial split case, self-priming, API, and solids-handling pumps. Together, they cover a hydraulic range to 10,000 GPM and 2,800 ft. TDH.

General Service Pumps
For general service applications , Carver offers horizontal and vertical pumps. Their GHF and GHC Series horizontal pumps are available in close coupled or frame mounted arrangements. These pumps are offered in cast iron, 316 SS fitted cast iron, or all 316 SS executions.

Standard features include a back pull-out design for simplified maintenance and inspection ease and 316 SS shaft sleeves for extended life expectancy.

Carver's GVC and GVT Series vertical pumps are available as standard tank mounted units or the more operator-friendly top pull-out designs for depths to 36 inches. For anything deeper, the GVS Series sump pump is offered for depths to 20 feet. All are available in cast iron, 316 SS fitted cast iron, or all 316 SS executions and come with a broad selection of discharge piping, top plate and underline choices.

Together, these General Service pumps offer hydraulic coverage to 10,000 GPM and 500 ft. TDH, which makes it hard to find an application Carver cannot handle.

In addition to these standard pumps, Carver also bring the benefit of 60 years experience in special application pumps. So, if you require special flows, pressures, temperatures, mounting or, drive configurations, Carver can create a pump specifically for you.

 
Process Industry Pumps
For process industry applications , Carver can be found whenever heavy-duty pumps are specified. Our process pumps include a full range of horizontal and vertical API pumps, multistage ring section, self-priming and solids handling designs.

The Maxum Series is Carver's medium duty process pump designed for the needs of the ANSI and API pump markets. Available as either foot or centerline mounted, it provides flows to 9,500 GPM and heads to 750 ft. with steel, 316 SS, CD4MCu, Alloy 20, Hastelloy B or C, Monel, and titanium material options.

The RS Series ring section, multistage pumps are available as horizontal or vertical units. The RS6 has 600 lb. flanges for heads to 1,900 ft. while the RS9 has 900 lb. flanges for discharge heads to 2,800 ft.


Both are available in ductile iron or CD4MCu with iron, bronze or CD4MCU internals. And, like the Maxum Series, the RS can be motor or turbine driven and is available in high temperature and magnetic drive arrangements, as well.

Accessories and auxiliaries, such as seal flush systems, vibration detectors, vapor tight vertical configurations, and full API baseplates are commonly available. Complete performance testing is also available.
   
Most importantly, as with all Carver pumps, these pumps offer the reliability, low total life cost, and lasting value that has made Carver one of the most trusted names in pumps.

Contact us at (513) 985-2566 or pumppro@iglou.com for more information!



 

 

 

 

 

 

 

 

About Us | Site Map | Privacy Policy | Contact Us | ©2005-2007 "Process Pumps & Technology On-Line" is a publication of Process & Industrial Training Technologies, Inc., Cincinnati, Ohio. The material presented within this site is for educational and information purposes only and the publisher makes no claim to warranty (expressed or implied) to its content nor the validity of advertisement, articles, and opinions expressed by the authors. Microsoft Internet Explorer ©1996 Microsoft and/or its suppliers, All rights reserved.